Free Shipping On Orders £15+

Start with your TEO

Welcome to the section dedicated to the functioning of the TEO heating device. On this page you will find all the information you need to start using the device.

Unlock TEO

As you get your new TEO out of the box, quickly press the power button 5 times in 2 seconds to lock or unlock TEO.

“Lock status” means the device is power off. “unlock status” means the device is power on. Avoid accidentally touching the button and causing it to heat up.

Activate TEO

Gently insert NEAFS stick Straight into the round slot (barrel) until it can’t go any further, do NOT twist the stick into the barrel.

Then activate TEO by pressing and holding the power button for 2 seconds. You will feel a small vibration to confirm heating has begun.

Please note again, the sticks are to be pushed straight into the device, and NOT to be “twisted” into the device.

Enjoy NEAFS

After 20 seconds you will feel another vibration indicating TEO is ready to use. You can start enjoy your NEAFS sticks.

Inhale as you would normally. Each stick lasts a minimum of 15 puffs.

Automatically Stop Heating

TEO will automatically stop heating after approx 4 minutes and the white light will flash, meaning the heating has stopped. If the light has gone out, and you need to continue heating, leave the Stick in the TEO, and press and hold the power button for 2 seconds. You will feel a small vibration to confirm heating has begun. After the 2nd vibration, you can then continue with the Neaf stick until you think it has come to an end.

Indicator Light Description

Flashing white light

TEO is warming up/TEO is about to finish smoking and stop heat

White light on

You can Enjoy smoking

Yellow light on

Low Battery

#STOPTOBER - Buy One Get One Free - All Sales in October
Updating…
  • No products in the basket.
Please select your product